White Hat Harbor

How to price 3D prints

A 3D print costs more than its filament: printer time, electricity, the plates that fail, your time, parts, packaging and the monthly costs of running the shop. On Etsy, fees come out of every sale as well. This page gives the formula for each cost, shows how to solve for a price that keeps your margin after fees, and works one print through. It's the method my 3D Printing Pricing Calculator spreadsheet uses.

Etsy's fees here are its US rates for sellers using Etsy Payments as of 26 October 2026. Rates differ by country and change from time to time: check Etsy's Fees & Payments Policy for your shop.

The cost of one print

Your slicer gives you the two numbers everything starts from: the grams of filament a plate uses (supports, brim and purge included) and its print time. A plate can hold several items; each item gets its share.

CostHow to work it out
FilamentSpool price ÷ spool weight in grams = cost per gram. Times the grams per plate, divided by the items on the plate.
Printer timeCost per print hour = printer price ÷ the print hours you expect before replacing it, plus maintenance per hour (nozzles, belts, build plates), plus electricity per hour. Times the print hours per plate, divided by the items on the plate.
ElectricityAverage watts ÷ 1,000 × your rate per kWh. Your rate is your power bill's total divided by the kWh it charged for. A printer drawing 150 W at $0.17 per kWh costs 2.55 cents an hour.
Failed prints(Filament + printer time) × failure rate ÷ (1 − failure rate).
LabourMinutes per item (removing it from the plate, supports, sanding, painting, packing) ÷ 60 × your hourly rate.
Parts and packagingKeyrings, magnets, heat-set inserts, the box or mailer.
OverheadMonthly costs you pay whatever you sell (commercial model licences, software, shipping supplies) ÷ the items you expect to sell a month.

Why the failure rate isn't just added on

With a 10% failure rate, one plate in ten fails, so you print 10 plates to get 9 good ones: 1.11 plates per good print. The extra 0.11 is 10% ÷ 90%, which is where rate ÷ (1 − rate) comes from. Adding a flat 10% would undercount it, and the gap grows as the rate does: at 20% you print 1.25 plates per good one.

Etsy's fees on one sale

FeeUS rateCharged on
Transaction fee6.5%The item price plus the shipping you charge (and gift wrap)
Payment processing3% + $0.25The order total, sales tax included
Listing fee$0.20When you list, again each time the item sells (the listing renews), and every 4 months it stays unsold
Offsite Ads15%, or 12% once a shop has made $10,000 in a yearOnly orders Etsy credits to one of its ads on other sites, up to $100 an order. Shops under $10,000 a year can opt out.
Etsy AdsYour own budgetOptional. For pricing, count it as a share of your sales.

Without ads, that's 9.5% of price plus shipping, plus $0.45 an order. Processing on sales tax is left out of the formulas below; it's small, and it's charged on money that isn't yours.

Solve for the price, don't add fees on top

Margin here means profit ÷ (price + shipping you charge), where profit is what's left after every cost, the postage you pay, Etsy's fees and your ads. Because the fees are a share of the price, picking a price from your costs and then paying fees out of it always lands under the margin you aimed for. Work it backwards instead:

Lowest price + shipping charged = (cost per item + postage + $0.25 + $0.20) ÷ (1 − 6.5% − 3% − Etsy Ads % − share of orders from Offsite Ads × 15% − target margin)

Take off the shipping you charge, and round up to your usual price ending. Set the target margin to 0 and the same formula gives your break-even price. (The Offsite Ads cap only matters on orders over about $667, where 15% passes $100.)

Worked example: a large articulated dragon

A made-up print shop selling a large articulated dragon in silk PLA, one per plate, with free shipping. The inputs:

The printer costs $1,199 ÷ 6,000 = $0.1998 an hour in wear, plus $0.10 maintenance, plus 150 ÷ 1,000 × $0.17 = $0.0255 electricity: $0.3253 per print hour.

Cost of one dragonAmount
Filament: 165 g × $0.02499$4.12
Printer time: 9.5 h × $0.3253$3.09
Failed prints: ($4.12 + $3.09) × 8% ÷ 92%$0.63
Labour: 15 min at $20 an hour$5.00
Packaging$1.20
Overhead: $45 ÷ 90$0.50
Cost per item$14.54

The price: ($14.54 + $6.90 + $0.45) ÷ (1 − 0.065 − 0.03 − 0.05 − 0.10 × 0.15 − 0.30) = $21.89 ÷ 0.54 = $40.54, the lowest price that makes 30%. Rounded up to end in .99, that's $40.99. Break-even is $21.89 ÷ 0.84 = $26.06.

Checked at a price of $42:

One sale at $42Amount
Price paid by the buyer$42.00
Cost per item−$14.54
Postage−$6.90
Transaction fee, 6.5%−$2.73
Payment processing, 3% + $0.25−$1.51
Listing renewal−$0.20
Etsy Ads, 5%−$2.10
Offsite Ads: 15% on 1 order in 10−$0.63
Profit$13.39
Margin: $13.39 ÷ $4231.9%

$42 clears the 30% target. Fees and ads take $7.17, more than the filament and printer time together. If the failure rate were 20% instead of 8%, the failed-print allowance would rise to $1.80, the cost to $15.72, and the margin at $42 would drop to 29.1%, under target; the lowest price for 30% becomes $42.72.

Other things that change the price

The spreadsheet

My 3D Printing Pricing Calculator does all of this for up to 40 products. You enter your filaments, printers, parts and monthly costs once; for each product you type the printer, filament, grams, hours, failure rate and minutes from your slicer and bench. It works out the cost per item, the lowest price for your margin and a rounded suggestion, and marks your own price PASS or FAIL. It also compares five prices side by side, checks a wholesale price, and prints a one-page quote for custom orders. Etsy's US fee rates are filled in and editable. The dragon above is its example data. It's an .xlsx file for Excel, Google Sheets, Apple Numbers and LibreOffice.

Other pricing guides