Makerwise support
Email support@whitehatharbor.com with "Makerwise" in the subject. I answer myself, Monday to Friday, 9:00 to 17:00 US Eastern time, with a first reply within 2 business days.
It helps to say which phone you use (iPhone or Android, and the system version), which calculator, what you typed and what you expected. If you think a number is wrong, the source you're comparing with helps most. In the app, Settings (the gear on the home screen), then Contact support, opens an email to me.
Electrical
Why are there two metric sizes for one AWG wire?
AWG and metric sizes don't line up. The app shows the nearest metric size and the smallest one that's at least as big, which is the one to buy if you're replacing a wire. Going the other way, a metric cable gets the nearest AWG and the next common AWG size up (odd gauges like 13 are rare in shops).
Why does the ampacity table say 25 A for 12 AWG, but my breaker is 20 A?
The table gives what the conductor can carry at each insulation temperature. For 14, 12 and 10 AWG copper, the NEC also caps the breaker or fuse at 15, 20 and 30 A (section 240.4(D)), and the app shows that limit on its own line. Most terminals are rated 60 or 75 °C, which limits you to those columns. All of it is reference only: your local code decides.
What length do I enter for voltage drop?
The one-way length from the source to the load. The formula already counts the return conductor (2 for DC and single phase, √3 for three phase). The suggested size is the smallest one that keeps the drop under your target; the app also warns when the size you picked is too small for the current, whatever the drop.
Can I type 4k7 or 2M2?
Yes. Ohm's law and the resistor lookup read k, M and m prefixes, the R and k codes printed on parts (4R7 is 4.7 Ω, 4k7 is 4.7 kΩ), and units like Ω, V, A or W after the number.
Soap
My supplier's SAP value is 190. Which number do I enter?
Either kind works. Add your own oil (Pro), choose whether the value is for NaOH or KOH, and type it in. A number over 1 is read as milligrams of KOH per gram (190 becomes 0.190), the way most charts print it, and the app works out the other lye from the molar masses.
What do the water settings mean?
% of oils is water as a share of the oil weight (38% is a common start). Lye % is the lye concentration, lye ÷ (lye + water); 25% to 40% is the usual range. Water:lye is the water weight for each gram of lye (2:1 is a 33% concentration). Whichever you set, the app shows the water weight, the concentration and the ratio, and warns about a solution stronger than 40% or weaker than 25%.
Why does KOH ask for a purity?
Potassium hydroxide is usually sold at about 90% purity, so the app divides by it to give the weight to put on the scale. Sodium hydroxide is taken as pure.
Resin and wood
My resin is 100:45 by weight. Does that work?
Yes. Set the ratio and choose By weight: the app splits the weight, not the volume. Use the method on your kit's label; the other column is a guide that assumes both parts weigh about the same per volume.
What's the deepest pour?
Deep-pour resins list a maximum depth per layer. Enter it as Deepest pour and the app splits the pour into layers of equal depth, with the amount for each. Leave it empty for one pour.
Why does 8/4 lumber count as 2 inches thick?
Hardwood is sold by its rough thickness in quarter inches, and board feet are worked out from that, even though the board planes down thinner. Type 8/4, 2 or 1 1/2; fractions and quarters both work.
Pro and purchases
I bought Pro but the app shows the free version
Open Settings and tap Restore purchases, signed in to the same Apple ID or Google account you bought with. The Pro screen has the same button. If Pro still doesn't show, email me with the order id from your App Store or Google Play receipt.
Is there a subscription to cancel?
No. Pro is one payment and nothing renews.
How do I get a refund?
App Store purchases are refunded by Apple: request one at reportaproblem.apple.com. On Google Play you can request one in the Play Store within 48 hours; after that, email me with the order id. The terms have the details.
Your data
Where are my projects stored?
Only on your device, in the app's own storage. There's no account and no server, so I can't see, recover or move them. Restoring your phone from its own backup (iCloud or Google) may bring them back; with Pro you can also keep a PDF sheet of each. Otherwise a new phone starts fresh, and Restore purchases brings Pro back. The web version keeps its projects in your browser.
How do I delete my data?
Delete a project from Projects, an oil of your own from the oil list, or delete the app (on the web, clear this site's data in your browser). If you want your purchase record at RevenueCat deleted too, email me with your order id. The privacy policy explains what that record holds.