Crispwise

Crispwise support

Email support@whitehatharbor.com with "Crispwise" in the subject. I answer myself, Monday to Friday, 9:00 to 17:00 US Eastern time, with a first reply within 2 business days.

It helps to say which phone you use (iPhone or Android, and the system version), what you tapped, and what you expected to happen. In the app, Settings (the gear, top right), then Contact support, opens an email to me.

Weighing and the dry check

Do I weigh the food with the tray or without it?

Either. To weigh food only, leave Empty tray at 0 and type what the food weighs. To weigh with the tray on the scale, set Empty tray to the weight of the tray (and its liner or lid, if you weigh with them) once, and type the full scale readings: the app takes the tray off. A new tray in the same batch starts with the last tray's empty weight.

How does "same weight twice" work?

When the cycle ends, weigh the tray and add it under Is it dry?. Add a few hours of dry time, weigh it again and add that. If it's lighter, water is still coming out. When two weighings in a row are within a gram (a tenth of an ounce if you weigh in ounces), the app says it's dry by weight, and offers to use that as the after weight. Then break the biggest piece in half: it should snap and be dry in the middle. Cold or damp inside means a few more hours for the whole batch.

Why did a weighing go up?

Dry food pulls moisture from the air quickly, and a scale on a soft or uneven surface can drift. Weigh it again quickly on a flat, hard spot. If it keeps gaining, close the machine and add dry time.

What does the percent mean?

Water removed is the weight the food lost divided by what it weighed fresh. Most fruit and vegetables lose 75% to 90%; meat and meals lose less. Yield is the dry weight as a share of the fresh weight. To rehydrate, add back about the water that came out; labels print that amount for each bag.

Storage and best-by dates

Where do the oxygen absorber sizes come from?

From the table in University of Arizona and University of Idaho Extension's Freeze Drying 101: Preparing and Storing (2025): 100 cc for a quart, 300 cc for a gallon, 1000 cc for 2 gallons, 3000 cc for 5 gallons. A size between two rows gets the bigger row's absorber (a pint gets 100 cc; a half gallon or a #10 can, 300 cc). More absorber does no harm. Type a different amount if you use your own.

How is the best-by worked out?

Sealed with the oxygen out (an absorber in a Mylar bag, jar or can, or vacuum sealed), the best-by is about 5 years from the sealed date: Utah State University Extension's Can I Freeze-Dry That? (2026) says longer times are possible but doesn't recommend eating home freeze-dried food past 5 to 10 years. Without an absorber, or in a resealable container, it's about a month. Fatty foods, raw meat and eggs and clear jars get a caution. Every date is an estimate; use the minus and plus buttons to move it by a month, and Back to the guidance date to undo.

Why is my Mylar bag's date the same as my jar's?

Both are sealed with the oxygen out, so the guidance gives both about 5 years. Jars let light in, which fades colour and some vitamins, so the app adds a caution to keep them in the dark.

Freeze dryers and electricity

Which freeze dryers does it work with?

Any. The app doesn't connect to the machine. Under Settings, Freeze dryers, name yours, pick a size (which fills in a typical tray count and average watts), and change anything that's different. Each batch remembers which machine it ran on.

What wattage should I use?

The average draw over a whole cycle, not the peak on the label: the vacuum pump and the freezer don't run flat out all the time. The defaults (600 to 850 W) come from typical per-cycle figures. A plug-in power meter between the machine and the wall gives your real number: divide the kWh it shows by the hours the cycle ran, times 1,000.

What is the pump-oil reminder?

A standard oil pump wants fresh oil every 4 to 5 batches (University of Arizona Extension). Set how often under the freeze dryer, or turn it off for an oil-free pump. After that many batches, the log shows a note; tap I changed the oil to start counting again.

Pro and purchases

How do labels work?

With Pro, tap Labels for these bags (PDF) on a batch, or Labels for the shelf (PDF) on the Shelf. You get one label per bag or jar still on the shelf, ten to a US Letter page (4 × 2 inch labels), with the food, batch, packed date, best-by, absorber and water to rehydrate. Print it, or save and share the PDF.

I bought Pro but the app shows the free version

Open Settings and tap Restore purchases, signed in to the same Apple ID or Google account you bought with. The Pro screen has the same button. If Pro still doesn't show, email me with the order id from your App Store or Google Play receipt.

Is there a subscription to cancel?

No. Pro is one payment and nothing renews.

How do I get a refund?

App Store purchases are refunded by Apple: request one at reportaproblem.apple.com. On Google Play you can request one in the Play Store within 48 hours; after that, email me with the order id. The terms have the details.

Your data

Where are my batches stored?

Only on your device, in the app's own storage. There's no account and no server, so I can't see, recover or move them. Restoring your phone from its own backup (iCloud or Google) may bring them back; with Pro you can also export them to CSV. Otherwise a new phone starts fresh, and Restore purchases brings Pro back.

How do I delete my data?

Delete a batch from the bottom of its screen, a storage line or a freeze dryer from its own screen, or delete the app. If you want your purchase record at RevenueCat deleted too, email me with your order id. The privacy policy explains what that record holds.